Latest conversations

Real questions and answers from the people who run the lines.

Corrosion testing for chain after plating

1 post0 views26m ago

Nickel release / REACH compliance for jewelry and buttons

1 post0 views3d ago

Barrel finishing for brass buttons without losing detail

1 post0 views3d ago

Color matching between zipper sliders and pulls

1 post0 views3d ago

Zinc vs. nickel-free plating for garment buttons

1 post0 views3d ago

Water reuse from rinse water: where do you start?

1 post1 views3d ago

How do you monitor nickel and chromium discharge?

1 post0 views3d ago

Sludge dewatering: filter press cycle time and cake solids

1 post0 views3d ago

Improving metal hydroxide settling in a small WWTP

1 post1 views3d ago

Hexavalent chromium reduction: ORP control setpoints

1 post0 views3d ago

Racking marks on anodized profiles: how to hide?

1 post1 views3d ago

Anodizing 6061 vs. 7075: bath life and appearance

1 post0 views3d ago

Sealing: hot water vs. nickel acetate vs. cold seal

1 post0 views3d ago

Dyeing black: avoiding smut and patchiness

1 post0 views3d ago

Type II vs. Type III anodizing for outdoor architectural parts

1 post0 views3d ago

Barrel zinc-nickel: how do you control pH drift?

1 post0 views3d ago

Bright acid tin in barrels: trouble with dull deposits?

1 post0 views3d ago

Perforated vs. slotted barrels for small parts

1 post0 views3d ago

Barrel plating of M3 fasteners: tangling and contact marks

1 post0 views3d ago

Barrel loading ratio for small screws: 50% or 60%?

1 post0 views3d ago

Hydrogen embrittlement relief after rack plating: your bake schedule?

1 post0 views3d ago

How often do you strip and re-coat racks?

1 post0 views3d ago

Zinc-nickel on complex brackets: thickness distribution targets?

1 post0 views3d ago

Rack coating and stop-off for chrome plating: what lasts longest?

1 post0 views3d ago

Current density mapping on a 1.2 m rack: how do you avoid high-current burn?

1 post0 views3d ago

Rack marks and contact points after pre-treatment: how do you reduce them?

1 post0 views3d ago

Ultrasonic cleaning before plating: frequency, temperature and time?

1 post0 views3d ago

How do you control carry-over contamination between alkaline and acid stages?

1 post2 views3d ago

Bright dip or nitric dip after zinc plating: when do you use each?

1 post0 views3d ago

Start a conversation